The Simple Way of Non-invasive Measurements

The MAS-2 Probe is a current clamp probe for non-invasive measurement of mA (tube current) and mAs. The greatest advantages are that the probe is easy to use and safe.

The probe is simply clamped on to the high voltage cable and then ready for measurements, no connection inside the X-ray generator is required. Together with your meter direct reading of mA and mAs as well as waveform are obtained.

Specifications with Piranha

Type MAS-2
Current range 10 - 4000 mA
Inaccuracy ±5 % or ±2 mA (±3 % at 250 mA)
Charge range 0.1 mAs - 9999 mAs
Frequency range DC - 5/500 Hz (-3 dB)
Size 183 x 61 x 36 mm
Connector Hirose
Maximum cable diameter 24 mm
Power source 9 V "6LR61" Alkaline battery

Specifications with Cobia Flex

Type MAS-2
Current range 10 - 4000 mA
Inaccuracy ±5 % or ±2 mA (±3 % at 250 mA)
Charge range 0.1 mAs - 999.9 As
Frequency range DC - 5/500 Hz (-3 dB)
Size 183 x 61 x 36 mm
Connector Hirose
Maximum cable diameter 24 mm
Power source 9 V "6LR61" Alkaline battery

Specifications with Barracuda

Type MAS-2B
Current range 10-4000 mA
Inaccuracy ±5 % or ±2 mA (±3 % at 250 mA)
Charge range 0.1 mAs-9999 mAs
Frequency range DC - 5/500 Hz (-3 dB)
Size 183 x 61 x 36 mm
Connector LEMO (electrometer module required)
Maximum cable diameter 24 mm
Power source 9 V "6LR61" Alkaline battery

Documents

Catalogues

The LabLogic Group will always treat your details with the utmost care and will never sell them to third party companies.

Please choose one of the following:



    Previous
    Next