HI-Q filter holders for particulate collection

Filter holders are used for the collection of particulate from the air (in-line or open-faced) taken with either high or low vol-ume pumps. Choosing the correct filter holder is dependent on three factors:

  1. Type of Pump (Rotary Vane or Centrifugal Fan)
  2. Filter paper dimensions (i.e.: 2” dia., 47mm dia., 8” x 10” , etc.…)
  3. Type of connecting fitting (i.e.: 3/8” male quick disconnect or thread type).

All of  HI-Q’s filter holders are machined from 6061-T6 Aluminum (unless otherwise specified) and anodized Black, Gold or Blue depending upon the filter type. 

Filter holders are also available for the collection of solid particulate on paper and/or volatile compounds in a filter cartridge taken from the air with either a high or low volume pump. In choosing the correct holder one needs to know the specific paper size (usually 2” or 47mm dia.), and a cartridge configuration.

All HI-Q filter holders are machined from 6061-T6 Aluminum (unless otherwise specified) and anodized Black, Gold or Blue depending upon the filter media they accept. 

HI-Q filter holders for particulate collection models

RVPH-Series

Open Faced Paper Only Holders. Includes 3/8” male quick disconnect coupling.

RVPA-Series

2”,47mm, & 4” Diameter Paper Only, In-Line Adapter Cones.

ILPH-Series

Complete, In-Line, Paper Only Assembly. Includes one 3/8” male & female quick disconnect.

CFPH-Series

Open Faced Paper Only Holders. 1½” male SPT, 11½ TPI male threaded fitting.

CFPH-Series

4” Dia. & 8” x 10” Filter Paper Holder Attach CFPH-45 & CFPH-810 to units with 4” dia., threaded intake fittings.

8 x 10 Removable Filter Paper Cartridge

Allows a user to pre-load & remove existing 8 x 10 filter collection media in a controlled environment. When in the field the user is able to replace the existing (used) cartridge with the pre-loaded (new) cartridge without having to directly handle the filter collection media.

RVH-Series

Open Faced, Combination Filter Paper & Cartridge Holder. Includes one 3/8” male quick disconnect.

RVA-Series

2”, 47mm, & 4” dia. In-Line Adapter Cones, used to convert open faced filter holders to In-Line.

ILFH-Series

Complete, In-Line, Combination Paper & Cartridge Filter Holder Assembly. Includes one 3/8” male & female quick disconnect.

Tandem Cartridge Holder

Insert this Tandem Cartridge Holder between the sections of any combination holder to create a multi cartridge sampling train.

CF-Adapters

Adapt Down from either 8” x 10” or 4” Dia. paper holders to 1½” Female SPT 11½ TPI.

CFH-Series

Open faced combination, cartridge & paper holder. Use with CF-Series Sampling Systems with a 1.50” Dia. female threaded 11.5 TPI intake.

Documents

The LabLogic Group will always treat your details with the utmost care and will never sell them to third party companies.

Please choose one of the following:



Previous
Next